UNITED STATES | WORLDWIDE | CONTACT | Search

Thermoelectric Modules - Center-Hole Peltier Coolers

The peltier coolers in Ferrotec's Center-Hole Thermoelectric Module series provide intermediate heat pumping capacity for cooling and heating applications that also require a center hole. These TECs are used in applications including industrial equipment, electrical equipment, laboratory instrumentation and opto-electronics. Standard substrates are lapped with +/-0.025mm tolerance.

For questions about specific peltier coolers or to place an order, contact your Ferrotec thermal solutions representative or use the Thermal Solutions Inquiry Form.

Model Number	I Max	V Max	ΔT Max	Qc Max	W1 Dim	L1 Dim	Height	Inner Diam
9508/023/030 B	3.00	3.20	72.00	5.20	15.10	15.10	3.18	5.00
9506/023/030 B	3.00	3.20	72.00	5.20	15.10	15.10	3.18	6.70
9504/023/030 B	3.00	3.20	72.00	5.20	18.00	18.00	3.18	8.00
9508/023/040 B	4.00	3.20	72.00	6.90	15.10	15.10	3.18	5.00
9506/023/040 B	4.00	3.20	72.00	6.90	15.10	15.10	3.18	6.70
9504/023/040 B	4.00	3.20	72.00	6.90	18.00	18.00	3.18	8.00
9504/125/060 B	6.00	17.20	72.00	56.00	39.70	39.70	3.80	4.70

The following terms are used in tables at Thot=50 °C:
Imax	Maximum input current in amperes at Qc=0 and ΔTmax
Vmax	Maximum DC input voltage in volts at Qc=0 and Imax
ΔTmax	Maximum temperature differential in °C at Qc=0 and Imax
Qcmax	Maximum heat pumping capacity in watts at Imax and ΔT=0
Thot	Temperature of the TEC hot side suring operation