Thermoelectric Modules - Two-Stage Peltier Coolers

The peltier coolers in Ferrotec's Two-Stage Thermoelectric Module series are designed to provide significantly higher temperature differentials than are obtainable with standard single-stage modules. These multi-stage TECs are suitable for low temperature applications where a moderate cooling capacity is required. Typical applications for these specialized peltier coolers include IR detectors, CCD arrays, and electo-optics.

For questions about specific peltier coolers or to place an order, contact your Ferrotec thermal solutions representative or use the Thermal Solutions Inquiry Form.

The specifications below are calculated at Thot=50 °C. Select recommend a module to get a list of potential solutions for your thermal problem from our standard module options.

Ferrotec's advanced software can help recommend a TEC for you.

Model Number	I Max	V Max	ΔT Max	Qc Max	W1 Dim	W2 Dim	L1 Dim	L2 Dim	Height
9520/157/035 B	3.50	18.20	106.00	11.00	20.00	39.70	20.00	39.70	7.39
9520/175/035 B	3.50	16.70	100.00	18.00	39.70	39.70	39.70	39.70	6.80
9520/185/065 B	6.50	17.90	95.00	37.00	29.80	39.70	29.80	39.70	6.99
9520/157/070 B	7.00	17.30	106.00	24.00	20.00	39.70	20.00	39.70	6.99
9520/197/080 B	8.00	17.80	91.00	52.00	29.80	39.70	29.80	39.70	6.45
9520/094/230 B	24.00	8.20	88.00	74.00	45.20	45.20	54.10	54.10	7.49

Updating
Recommendation