UNITED STATES | WORLDWIDE | CONTACT | Search

Thermoelectric Modules - High-Power Peltier Coolers

The peltier coolers in Ferrotec's High-Power Thermoelectric Module series are designed to maximize heat pumping capacity. These single-stage TECs enable increased cooling capacities and efficiencies in a standard thermoelectric cooler footprint. The high cooling density of these peltier coolers enables high-performance heat exchangers in smaller, more efficient sizes.

For questions about specific peltier coolers or to place an order, contact your Ferrotec thermal solutions representative or use the Thermal Solutions Inquiry Form.

Model Number	I Max	V Max	ΔT Max	Qc Max	W1 Dim	L1 Dim	L2 Dim	Height
9500/241/060 B	6.00	33.10	72.00	108.00	55.00	55.00	0.00	4.16
9500/241/085 B	8.50	33.10	72.00	153.00	55.00	55.00	0.00	3.94
9500/391/085 B	8.50	53.80	72.00	248.00	55.00	55.00	0.00	3.35
9500/199/100 B	10.00	27.40	72.00	148.00	40.00	40.00	0.00	3.35
9500/241/100 B	10.00	33.10	72.00	180.00	55.00	55.00	0.00	3.64
9500/337/100 B	10.00	46.40	72.00	252.00	55.00	55.00	0.00	3.35
9500/127/120 B	12.00	17.50	72.00	114.00	39.70	39.70	0.00	3.45
9505/127/150 B	15.00	17.50	72.00	142.00	40.00	40.00	0.00	3.45
9500/131/150 B	15.00	18.00	72.00	147.00	30.00	60.00	0.00	3.45
9501/242/160 B	16.00	33.30	72.00	289.00	55.00	55.00	58.00	3.45
9506/031/600 B	60.00	4.30	72.00	139.00	55.00	55.00	0.00	4.85

The following terms are used in tables at Thot=50 °C:
Imax	Maximum input current in amperes at Qc=0 and ΔTmax
Vmax	Maximum DC input voltage in volts at Qc=0 and Imax
ΔTmax	Maximum temperature differential in °C at Qc=0 and Imax
Qcmax	Maximum heat pumping capacity in watts at Imax and ΔT=0
Thot	Temperature of the TEC hot side suring operation